Products

LYDIA - HYDRO WOOD PELLET STOVE

Wood Pellet Fired Hot Water Stove. Thanks to its front glass design, it heats up the roomwhere it is installed and provide hot water to heat up the other rooms. The Hydro Stove is easyto be installed thanks to having the components of circulation pump, expansion vessel, safetyvalve and air release valve. The combustion chamber and burning pot of this device are made of special chrome steel resistant to high temperature, and the heat exchanger and water jacket are made of steel.

  • High efficiency and elegant design
  • Automatic fuel feed
  • Advanced weekly timer
  • Modulation up to flue temperature
  • Back burn protection system
  • Temperature control with room thermostat
  • Automatic Ignition System
  • Control panel with modulation
  • Indoor remote controller
  • Strong insulation with glass wool and ceramic

Technical Info

Model LIDYA25
Capacity kW 5-25
Width(A) mm 560
Length(B) mm 740
Height(C) mm 1210
Cold Water Inlet Height (D) mm 205
Hot Water Outlet Height(E) mm 525
Flue Outlet Height (F) mm 175
Flue Diameter mm 80
Flow-Return inch 1/2
Expansion Outlet inch 1/2
Fill-Empty mm 1/2
Weight kg 196
Water Volume l 37
Hopper Capacity l 25
Max. Operation Pressure bar 1,5
Test Pressure bar 2,15
Temp. Control Limit ℃ 35-85
Max. Operation Temp ℃ 90
Reducer Motor Power W 50
Fan Power W 50
Operation Power and Frequency V/Hz 230/50
Operation Amper A 6
Fuel Consumption Kg/h 1,1-5,6

“Girmiş olduğunuz değerlere göre hesaplanan ısı kapasiteleri tamamen tahmini bilgi olarak verilmiş olup Kozlusan bu değerlerin doğruluğunu hiçbir zaman garanti etmez.”
“En doğru bilgi için lütfen en yakın yetkili satıcılarımızdan birine veya tesisat konusundaki mühendislik firmalarına başvurunuz.”